Model Building

AK8047 - Cork Sheet – FINE grained 200x300x2mm

AK Interactive Cork Sheets - Fine Grained - 200 X 300 X 2mm (2 Sheets)

AK8052 - Cork Sheet – FINE grained 200x290x6mm

AK8055 - Cork Sheet – COARSE grained 200x290x6mm

AK Interactive Cork Sheet - Coarse Grained - 200 X 290 X 6mm (1 Sheet)

AK8076 - Elastic Masking Putty

Reusable camouflage elastic putty for masking areas when airbrushing.Specially designed elastic putty doesn’t leave any residue on any surface.The camouflage elastic putty can be easily removed without damaging other painted areas.AK’s camouflage elastic...

AK9134 - Elastic Rigging Bobbin Mega-Thin for 1/700 or smaller (20m / 66ft)

The elastic thread is a suitable material in modeling to make any type of ultrarealistic bracing in airplanes, boats, antenna fastening, Sci-fi, dioramas, etc. Elasticity allows for easy installation and a natural fit tight. It can be glued with...

AK9135 - Elastic Rigging Bobbin Hyper-Thin for 1/72, 1/350 or smaller (20m / 66ft)

The Elastic Thread Is A Suitable Material In Modeling To Make Any Type Of Ultrarealistic Bracing In Airplanes, Boats, Antenna Fastening, Sci-Fi, Dioramas, Etc. Elasticity Allows For Easy Installation And A Natural Fit Tight. It Can Be Glued With...

AK9136 - Elastic Rigging Bobbin Super-Thin for 1/32 or smaller (20m / 66ft)

The Elastic Thread Is A Suitable Material In Modeling To Make Any Type Of Ultrarealistic Bracing In Airplanes, Boats, Antenna Fastening, Sci-Fi, Dioramas, Etc. Elasticity Allows For Easy Installation And A Natural Fit Tight. It Can Be Glued With...

AK9311 - Photo Etched Saw Set

AK Interactive Photo Etched Saw Set

AK9328 - Precision Dispensers (6 Cannulas & 2 Bottles)

AK Interactive Precision Dispensers (6 Cannulas & 2 Bottles)

AK9516 - Scriber

AK Interactive Scriber

AK9527 - Rivet Marking Set 3 (Recommended for 1/32-1/35)

The rivet engraving wheels are extremely easy to use and vary depending on the required scale. The tool can be fitted into an AK9011 cutter handle. The toothed wheel glides over plastic or resin, pressing to create marks and engraving negative rivets on...

AK9531 - Photoetched Bending Tool (2 screws)

Photoetch bending tool. Made of high quality steel. Separate the piece from the photoetch sheet. Place the piece inside the tool by loosening the screws and secure it by tightening the screws again without forcing it. Bend the piece using the blade...

Alligator Clips Paint Stand (4) - 74528

These are handy clips for holding newly cemented or painted parts. They can be used together with the Tamiya Painting Stand (ITEM 74522), Work Stand (ITEM 74064), or the Bottled Paint Stand (ITEM 74077).

Aluminium Hand Saw

Includes: Aluminium Alloy Hand Saw    1 Hand Saw Blade - Fine (Wide)    1

AMIG2029 - Ultra Decal-Set Solution 30ml

Allows one to set a decal in place with ease. Intended to be used before Mig Decal Fix.

AMIG2030 - Ultra Decal-Fix Solution 30ml

Softens and slightly melts a decal to allow one to fix a decal in place with ease. Intended to be used after Mig Decal Set.

AMIG2040 - Arming Putty Classic 20ml

Ammo Mig Arming Putty Classic 20ml

AMIG8033 - Spare Jars for Mixes (5 x 35ml)

Store your paint mixes in these jars easily and efficiently. This pack contains 5 ready-to-use 35ml reusable bottles. The transparent container makes them perfect for clearly distinguishing the color and consistency of each mix. These bottles also have a...

AMIG8566 - Polish Sanding Stick (400/4000)

AMIG8692 - Standard Blade Straight (4pcs)

AMIG8693 - Standard Blade Curved (4 pcs)

AMIG8694 - Standard Blade Ripper (4 pcs)

AMIG8695 - Standard Blade Curved large (4 pcs)

AMM2033 - Anti-Slip Paste

High quality acrylic product to realistically represent non-slip surfaces in 1/48 and 1/72 scale, and is particularly useful for aircraft as well as other rough textures on any type of surface including rust effects on 1/35 and larger scales.Tube of 20...

ANTI-SLIP STICKER - TAM87227

The Tamiya Anti-Slip Sticker (75x150mm) is designed for many craft/hobbies use. Cut into desired size using scissors or cutting knife. • Size: 75x150mm• Thickness: about 0.4mm (excluding backing film)• Synthetic rubber surface and strong double-sided...

AT-AP Multi-Purpose Processing Assistance Platform

The DSPIAE AT-AP is a carefully crafted, versatile platform that supports a range of modeling activities including drilling, grinding, trimming, and gluing. Its stable and ergonomic design helps streamline repetitive tasks in the workshop, enhancing...

Aurora Green Seal (1pc)

BANDAISPIRITS BUILD UP NIPPER

BANDAISPIRITS BUILD UP NIPPER

BENDING PLIERS - 74067

Long-nosed pliers specially designed for use with photo-etched parts. Guaranteeing precision bending for all sized pieces, the tip of the pliers is designed for use with small parts while the side is meant for bending large parts. Easy grip handle...

CEMENTED CARBIDE CARVING KNIFE (semicircle)

Border Model CEMENTED CARBIDE CARVING KNIFE (semicircle)

CEMENTED CARBIDE ENGRAVER

Single carbide engraving blade made of tungsten carbide, which makes it highly resistant to abrasion and significantly harder than ordinary steel.

Clamp Holding Handle For Carving and Scribing Tips

DSPIAE Clamp Holding Handle For Carving and Scribbing Tips

CRAFT KNIFE II - 74153

The craft knife is an essential in any modelers tool box - why not upgrade to Tamiya's latest offering? It features an auto-lock slider for safety purposes, and a resilient stainless steel blade that can be set for left- or right-handed use. Features a...

CRAFT SCISSORS - 74124

These versatile scissors are a must-have addition to every modelers' tool kit - not only can the high-quality blades cut through plastic such as the polycarbonate used on many Tamiya R/C model bodies, they can also handle softer metals and other...

CW4539 - Dust Dabber

Keep your models looking new! The Dust Dabber safely removes dust, dirt, and debris from your models! Also use Dust Dabber on other solid surfaces around your scenes.

Dawning Tungsten Steel Push Broach 0.125mm

Dawning Tungsten Steel Push Broach 0.125mm

Dawning Tungsten Steel Push Broach 0.15mm

Dawning Tungsten Steel Push Broach 0.15mm

Dawning Tungsten Steel Push Broach 0.1mm

Dawning Tungsten Steel Push Broach 0.1mm

Dawning Tungsten Steel Push Broach 0.2mm

Dawning Tungsten Steel Push Broach 0.2mm

Dawning Tungsten Steel Push Broach 0.3mm

Dawning Tungsten Steel Push Broach 0.3mm