Model Building

08525 - Precision Tip Tweezers

Precision Tip tweezers for cleaning prints. Colors chosen randomly and may be different from those in photo (yellow, black, blue, red, green, iridescent). Size is 4.4" long by 1.7" wide. Stainless steel. These are the same tweezers that Reaper uses to...

08526 - Micro-Mesh Dual Angle Finishing File

This 5 3/4″ x 1/2″ size file tapers to a 15-degree angle, allowing you finishing capabilities you didn’t have before. Use for removing flash and surface imperfections and take advantage of the fact that they are long-lasting. After use, rinse in water,...

24″ X 18″ Self Healing Double Sided Green Cutting Mat

Alligator Clips Paint Stand (4) - 74528

These are handy clips for holding newly cemented or painted parts. They can be used together with the Tamiya Painting Stand (ITEM 74522), Work Stand (ITEM 74064), or the Bottled Paint Stand (ITEM 74077).

ANTI-SLIP STICKER - TAM87227

The Tamiya Anti-Slip Sticker (75x150mm) is designed for many craft/hobbies use. Cut into desired size using scissors or cutting knife. • Size: 75x150mm• Thickness: about 0.4mm (excluding backing film)• Synthetic rubber surface and strong double-sided...

BENDING PLIERS - 74067

Long-nosed pliers specially designed for use with photo-etched parts. Guaranteeing precision bending for all sized pieces, the tip of the pliers is designed for use with small parts while the side is meant for bending large parts. Easy grip handle...

BENDING TWEEZERS - 74117

These precision tweezers are excellently-suited to work with fine photo-etched parts such as those made from brass and nickel silver. A contact area of less than 1mm enables the picking up and bending of extremely small parts, and the tool can be used to...

Border Tools Two-Way Ceratizit Edge Scraper Blue

4 Sized edge scraper with additional angle scraper.

Conical File - 74164

This conical file is great for shaving the interior of pipe-shape parts thinly, adjusting hole sizes to insert dowels and modifying carbon fiber parts used for Mini 4WD products.• Use this item to modify molded parts with holes. Length: 150mm. (File...

CRAFT SCISSORS - 74124

These versatile scissors are a must-have addition to every modelers' tool kit - not only can the high-quality blades cut through plastic such as the polycarbonate used on many Tamiya R/C model bodies, they can also handle softer metals and other...

Craft Side Cutter :Plastic/Soft Metal - 74129

This is another handy cutting tool for the advanced modeler’s armory. These side cutters are for use in cutting materials which standard side cutters cannot cut or would not cut cleanly. Examples of materials they can cut are thicker plastic gate on R/C...

Elastic Rigging Bobbin Hyper - Thin

The Elastic Thread Is A Suitable Material In Modeling To Make Any Type Of Ultrarealistic Bracing In Airplanes, Boats, Antenna Fastening, Sci-Fi, Dioramas, Etc. Elasticity Allows For Easy Installation And A Natural Fit Tight. It Can Be Glued With...

Elastic Rigging Bobbin Mega - Thin

The elastic thread is a suitable material in modeling to make any type of ultrarealistic bracing in airplanes, boats, antenna fastening, Sci-fi, dioramas, etc. Elasticity allows for easy installation and a natural fit tight. It can be glued with...

Engraving Blade Holder (Various Colors) - 74139

This is a lightweight, ergonomically designed holder for Tamiya’s line-up of Fine Engraving Blades. (Items 74135-38) • Engraving Blade Holder x1• Length: 126mm, diameter: 6mm.• Made from lightweight, durable aluminum, with a knurled grip section for...

Engraving Blade Holder Red - 89984

This is a color variation of the Engraving Blade Holder (original: Item 74139), with the handle in vivid red. It can be used with the wide range of Tamiya Fine Engraving Blades, Needle, and Chisel. • Engraving Blade Holder (Red) x1• Length: 126mm,...

Entry Nipper - Blue

BANDAISPIRITS ENTRY NIPPER

Fine Craft Saws 0.15mm Thick - 74105

In some situations, the cut made by a normal modeling saw may be too wide, leading to unwanted changes to the length of the part. This set of saws solves this problem as they are made from 0.15mm thick etched metal. The grips of the saws can be folded...

Fine Drill Set (5 Precision Drills) 74044

0.3mm, 0.4mm, 05.mm, 0.6mm and 0.8mm   This handy set contains five different sizes of drill bit for use in a variety of modeling applications. They can be used on plastic and softer metals like aluminum. The set comes with a plastic storage case and...

FINE PIN VISE 0.1-3.2MM - 74050

Model assembly often calls for the drilling of holes of various sizes and these Fine Pin Vises are the ideal tools for the job. The Fine Pin Vise D is compatible with 0.1mm-3.2mm diameter drill bits while the Rne Pin Vise S is designed for use with drill...

FINE PIN VISE D-R (0.1-3.2MM) - 74112

The pin vise is an important tool in the armory of any modeler, allowing the making of precision holes for the purpose of modifying scale models. Compatible with drill bits of sizes from 0.1-3.2mm.Rotating grip end features built-in ball bearings for...

Finishing Abrasives, P180 - 87092

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant. 180 Grit

Finishing Abrasives, P240 - 87093

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant. 240 grit

Flush Cutter - Cutting Plier

 Professional Quality• 58 HRC• Length: 4-1/2”• Single Wire Spring• Cuts up to 1mm Thick Copper Wire• Comfort Grip Handle• Great for Jewelry Making, Watch Making, Fine Metal Work, Electronics Etc

GW66-61 CITADEL TOOLS: KNIFE

Every Warhammer hobbyist needs a hobby knife, so the Citadel Tools design team created one just for them. It features a fully sculpted hard plastic handle, and incorporates a number of clever features for safety and convenience:– Fixed single slot blade...

GW66-63 SUPER FINE DETAIL CUTTERS

Modern Citadel plastic kits are packed with details, extras, and add-on bits, including some very small pieces. The Citadel Tools design team had these fine details in mind when they redesigned the beloved cutters used by so many Warhammer hobbyists...

GW66-64 CITADEL TOOLS: DRILL

Do you want to drill tiny holes in your miniature gun barrels so they look like they could fire miniature bullets? Want to experiment with pinning hard-to-fix pieces in place when building and converting your miniatures? A reliable drill suitable for use...

HG ANGLED TWEEZERS - 74047

These precision made stainless steel tweezers are ideal for handling small, delicate plastic model parts. An angled type which can access hard to reach areas and a straight type which directly transmits finger movements to the tip for optimum control are...

HG ANGLED TWEEZERS ROUND TIP - 74108

This precision tweezers is made from high-quality SUS410 stainless steel. Its rounded tips enable easy handling and will reduce the chance of causing accidental damage to the object being held. Length: 120mm.

HG Micro Rivet Punch

HG Micro Rivet Punch (23 Pcs , 0.25mm-1.35mm)

HG STRAIGHT TWEEZERS - 74048

HG Straight Tweezers

HG Tweezer Grip Scissors - 74157

These handy scissors are activated by pushing the grips together, for a safe cutting process. Short, durable blades make them ideal for modeling uses such as on Mini 4WD vacuum molded bodies, decals, stickers, masking tape and more. You’ll wonder how you...

High Quality Scraper / Double Straight Blades - 09969

High Quality Scraper/Double Straight BladesHigh quality metal and plasticFor use on plastic parts onlyEasily shaves and cleans plastic partsIncludes protective blade coverMakes parallel lines simple

Illuminated Multi-Power Head Magnifier

  2 Lens and Loupe   9x 1.9x 4.5x    Adjustable Head Strap with Dial Control, Tilt & Angle Controls for Adjusting the Light Beam   2AA Batteries Required 

MASKING TAPE 4: 40mm x1 - 9999

Milliput - Black

The epoxy putty with a thousand uses in modelling D.I.Y and industry.Milliput is the trade name for our epoxy putty. We produce five grades: Standard Yellow/Grey, Silver Grey, Superfine White, Terracotta, and the latest addition - Milliput Black. Each...

Milliput - Terracotta

For the restoration of terracotta and other ceramics. Also for the repair of garden urns, pots, Statuettes and damaged brickwork, etc. Also for sculpting and modelling.Milliput is the trade name for our epoxy putty. We produce five grades: Standard...

Milliput - Turquoise Blue

Milliput is a versatile manipulative two part epoxy putty which when mixed together sets rock hard. When first mixed, the putty is pliable and easily shaped. By wetting the Milliput with a finely woven moist cloth a very smooth finish can be easily...

Mini Drill Bit Set - 15pc (1.05mm - 2.0 mm)

1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5 1.6 1.7 1.8 1.9 2.0    

Mini Vacuum Handy Cleaner

709985 Mini Vacuum Handy CleanerGlitter, eraser shavings, sanding dust? Maintain a clean work space and foster productivity with this palm size mini electric vacuum. Fast and easy cordless clean up.Uses 2 AA batteries not included.Filters can be cleaned...

Model Kit Tool Set (Clamp for Elastic Band,Clamp,Bottle Opener) - 09951

Model Kit Tool SetClamp for Elastic Band, Clamp, Bottle OpenerClamp for elastic band, clamp, bottle opener18 pieces plus 3 parts