Sanding

08526 - Micro-Mesh Dual Angle Finishing File

This 5 3/4″ x 1/2″ size file tapers to a 15-degree angle, allowing you finishing capabilities you didn’t have before. Use for removing flash and surface imperfections and take advantage of the fact that they are long-lasting. After use, rinse in water,...

2mm Sanding Sponge 5Pcs

AK-Interactive: Mixed Grit Sanding Pads (4 pads)

Set of 4 -  Super Fine - 800 Grit Fine - 400 Grit Medium - 220 Grit Coarse - 120 Grit

AMMO: Sanding Sponge

The flexibility of the material easily conforms to any shape including rounded surfaces or hard-to-reach recesses. . Can be used on a full range of materials including resin, metal, wood and, of course plastic. It’s also highly useful for removing traces...

BASIC FILE SET - 74046

This set contains three types of files; flat, round and half-round, specially developed for modeling use. Files are suitable for working plastic and soft metals. Each file features a compact size of approximately 16cm in length.

Basic File Set Smooth Double Cut - TAM74104

This handy file set contains 3 double-cut files with black rubber grips which provide a smooth finish desired on plastic scale models, Mini 4WD models and even metal surfaces. The files can be stored in the accompanying vinyl case to keep them safe from...

Carbon Fiber Sanding Block Set 1mm Thick (3pcs)

Conical File - 74164

This conical file is great for shaving the interior of pipe-shape parts thinly, adjusting hole sizes to insert dowels and modifying carbon fiber parts used for Mini 4WD products.• Use this item to modify molded parts with holes. Length: 150mm. (File...

Finishing Abrasive Set Ultra Fine - 87024

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant. 1200 x 1pc 1500 x 2pcs 2000 x 2pcs

Finishing Abrasives P1000 (3) - 87057

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.

Finishing Abrasives P600 (3) - 87055

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.

Finishing Abrasives Set Fine - 87010

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant. 400 x 2pcs 600 x 1pc 1000 x 2pcs

Finishing Abrasives Set Medium - 87009

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant. 180 x 2pcs 240 x 1pc 320 x 2pcs

Finishing Abrasives, P1200 (3) - 87058

Finishing Abrasives P1200 (3)

Finishing Abrasives, P1500 (3) - 87059

Finishing Abrasives P1500 (3)

Finishing Abrasives, P180 - 87092

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant. 180 Grit

Finishing Abrasives, P240 - 87093

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant. 240 grit

Finishing Abrasives, P320 - 87094

320 grit sandpaper. Can be used dry or wet.

Model Sanding Stick 3 Pack

Model Sanding Stick [MINI] 3 Pack

PLASTIC MODEL FILE FLAT 6MM - TAM74069

Plastic Model File Flat 6mm 6mm wide file features wave pattern teeth, and special design to prevent teeth from clogging with shavings, ensuring continued high quality finish. Conventional flat shape will provide professional finish for any form of...

Plastic Modeling File 16mm Flat - TAM74058

This high-quality flat file is specially designed for modeling and putty shaping. The file features a wave pattern tooth for a professional finish with plastic or putty materials. Features chip breaker grooves to prevent teeth from clogging. Flat 16mm...

Sander / Polisher - 9939

Tweezer Set (4 piece assortment)Kit includes 4 tweezers:Fine tip long straightFine tip curvedFine tip straightFlat endLengths range from 4 3/4" (120mm) to 5 1/2" (140mm)

Sanding Needles (3ea of 3 diff grits/Bag)

Sandpaper and File 2 in 1 Tool (Black Tide)

Includes 1x Border Tools 2 in 1 Sanding tool in Black.

Swizzle Stick Sanders Assorted 15 Pack - HSX101

Contains 3 each of 5 different grits: Brown 100, Zebra 180, Blue 240, Yellow 320, & Orange 400.

Swizzle Stick Sanders Assorted Fine 15 Pack - HSX102

Contains 5 each of 3 different grits: Blue 240, Yellow 320, & Orange 400.

Tamiya Fine Lapping Film #4000 (3) - 87185

Tamiya lapping film is a great resource for model builders of all types. It allows you to provide a smooth and even finish to your paint job. Each film piece is uniformly covered with fine abrasive particles and can be used to rub away rough surfaces or...

Tamiya Sanding Sponge Sheet 1500 - 87150

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces...

Tamiya Sanding Sponge Sheet 180 - 87161

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces...

Tamiya Sanding Sponge Sheet 2000 - 87170

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces...

Tamiya Sanding Sponge Sheet 240 - 87162

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces...

Tamiya Sanding Sponge Sheet 3000 - 87171

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces...

Tamiya Sanding Sponge Sheet 320 - 87163

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces...

Tamiya Sanding Sponge Sheet 400 - 87147

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces...

Tamiya Sanding Sponge Sheet 600 - 87148

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces...