Tools & Supplies

BSI171 - IC Loc Blue .34 FL. oz.

IC-LOC™ Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required.

BSI173 - IC Loc Red .34 FL. oz.

IC-LOC™ Red is a medium thickness, high strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Red™ is cured, the fasteners are permanently together and cannot be disassembled. IC-LOC Red™ will maintain its...

BSI175 - IC Loc Green .34 FL. oz.

IC-LOC™ Green is a thin, medium-high strength threadlock that is applied to fasteners that are already assembled. IC-LOC Green™ wicks down into the threads of fasteners using capillary action and has good performance even with oil coated fasteners.

BSI177 - IC Loc Purple .34 FL. oz.

IC-LOC™ Purple prevents loosening of small fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Purple seals and prevents rusting of threads.

BSI202 - Quik Cure Epoxy 5 Minute Epoxy 9 oz.

QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in...

BSI203 - Mid Cure 15 Minute Epoxy 4.5oz.

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass...

BSI204 - Mid Cure 15 Minute Epoxy 9oz.

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass...

BSI205 - Slow Cure 30 Minute Epoxy 4.5 oz.

SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as...

BSI209 - Finish Cure 20 Minute Epoxy 4.5oz

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our...

BSI211 - Quik Cure Epoxy 5 Minute Epoxy 13 oz.

QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in...

BSI212 - Mid Cure 15 Minute Epoxy 13 oz.

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass...

BSI222H - Grip It Grip Glue 1 oz.

Grip-it™ has been specifically formulated for applying grips and mats for recreational vehicles. Grip-It™ works great on all makes of grips for motorcycles, jet skis, snowmobiles and bicycles. Grip-It™ has a 10-25 second working time and the grip is...

BSI301 - Extender Tips (6)

Extender Tip- #301 For use over BSI's standard #312 top. Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.

BSI302 - EXTRA-FINE EXTENDER TIPS (6)

Extra Fine Extender Tip - #302 For use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time. Thin CA tends to run everywhere, so these allow precise application.

BSI303 - Extra Long Extender Tips

For use over the standard #312 top, they provide a rigid tip with extended length to get thin and gap filling CA into hard to reach areas. They are very resistant to clogging and can be cleaned by soaking in acetone.

BSI304 - Pocket CA Extender Tips (6)

Pocket CA Extender Tip - #304 For use with BSI's Pocket CAs. It slips over the tip of the Pocket CA top to allow for finer application of the CA. With the tip, the CA can be applied to confined areas.

BSI305 - PTFE Tubing

PTFE Tubing - #305 Two foot length of tubing can be cut off to any length (usually 2"). With one end cut at a 45° angle, can be inserted 1/8" into Pocket CA top and into #312 top if it is cut down an additional 3/64". For thin CA.

BSI312 - EXTRA CA TOPS

Replacement top that is on all of BSI's non-Pocket CAs. Tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle.

BSI313 - Extra CA Over Cap

Replacement colored cap that fits over the #312 top.

BSI314 - Pocket Ca Top & Cap

Replacement combination of top and screw-on cap that has a built-in pin for Pocket CAs. Will fit on Pocket CA bottles only.

BSI321 - CA Applicators Regular Tip

#321 - Regular Tip Non-clog 6" long pipette for the application of gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper

BSI322 - CA Applicators Fine tip

#322 - Fine Tip Non-clog 6" long pipette for the application of thin CAs. Can also be used for the fine application of Insta-Set accelerator and for applying fine lubricating oils. CA can be kept in the applicator for two weeks.

C1167 - Sticky Spots

This high-tack, round, multi-sided adhesive yields instant placement on smooth and textured surfaces. It is repositionable and leaves no residue: perfect for positioning Support Panels, Modeling Sheets and Road Risers. Packaged in a convenient, pull-out...

C1192 - Plaster Cloth

Plaster Cloth is the easy, convenient method for modeling lightweight land contours and terrain base. The plaster-coated cloth creates a durable hard shell, designed to accept Earth Colors™ Liquid Pigment, paints, plaster castings and landscape materials...

C1211 - Realistic Water

Features 16 fuid ounces Contents covers 17" diameter area at recommended depth Recommended maximum layer depth of 1/8" No mixing required - pours directly from the bottle Make lakes ponds and rivers with ease OverviewUse to model still or slow-moving...

C1273 - Extra Coarse Buff Talus

C1276 - Coarse Brown Talus

21.7 in3 (355 cm3)

C1277 - Extra Coarse Brown Talus

21.7 in3 (355 cm3)

C1280 - Coarse Gray Talus

21.7 in3 (355 cm3)

C1282 - Fine Natural Talus

21.7 in3 (355 cm3)

C1283 - Medium Natural Talus

21.7 in3 (355 cm3)

C1284 - Coarse Natural Talus

21.7 in3 (355 cm3)

C1285 - Extra Coarse Natural Talus

C1286 - Gravel: Grey Fine

Gravel is sized to model gravel roads more realistically. Use Accent for shoulders and to model bare spots on roads. Gravel- 10.8 in3 (176 cm3)Accent Powder- 1.8 in3 (29.4 cm3)Coverage: Models a gravel road 14' x 2" (4.26 m x 5.08 cm) Actual coverage...

C1287 - Gravel Gray Coarse

Gravel is sized to model gravel roads more realistically. Use Accent for shoulders and to model bare spots on roads. Gravel- 10.8 in3 (176 cm3)Accent Powder- 1.8 in3 (29.4 cm3)Coverage: Models a gravel road 12' x 2" (3.65 m x 5.08 cm) Actual coverage...

C1288 - Gravel Buff Fine

Gravel is sized to model gravel roads more realistically. Use Accent for shoulders and to model bare spots on roads. Gravel- 10.8 in3 (176 cm3)Accent Powder- 1.8 in3 (29.4 cm3)Coverage: Models a gravel road 14' x 2" (4.26 m x 5.08 cm)

C1289 - Gravel Buff Coarse

Gravel is sized to model gravel roads more realistically. Use Accent for shoulders and to model bare spots on roads. Gravel- 10.8 in3 (176 cm3)Accent Powder- 1.8 in3 (29.4 cm3)Coverage: Models a gravel road 12' x 2" (3.65 m x 5.08 cm) Actual coverage...

Carbon Fiber Sanding Block Set 1mm Thick (3pcs)

CEMENTED CARBIDE ENGRAVER

Charybdis Magnetic Lacquer Shaker

Contains: DSPIAE Magnetic Paint Stirrer    1 Micro-USB Cable    1 440 Mixing Rotors    20 Self-Adhesive Anti Slip Pad    1