Product Description
The cutting edge RWD drift machine is finally here as a chassis kit!
Drifting, which involves dramatically sliding the car body, has become one of the most popular categories of R/C cars. In particular, 1/10 scale EP drift cars with RWD (rear-wheel drive) are a star attraction in the R/C car world, as they allow for spectacular counter-steering drifts. Kyosho has also developed the 1/10 RWD drift chassis, FAZER D2, and has been selling it as a ready-to-run set combined with a realistically sculpted Toyota 86GT body. And now, a chassis kit without a body or mechanics, which has been highly requested by fans, is making its debut! The FAZER D2 chassis kit is basically the same as the chassis for the conventional ready-to-run set, but parts that were previously optional are now standard equipment, resulting in improved driving performance and an expanded range of settings. The optional parts have also been carefully selected to be optimal for tuning up from the normal kit, so it will exhibit outstanding drift performance just by assembling the chassis kit. Another key point is that the motor mounting position, which is highly effective in adjusting the driving characteristics, can be changed. Furthermore, it is equipped with the variable wheelbase mechanism that was a characteristic of the FAZER D2 chassis, and combined with the rear tread (vehicle width) adjustment function, it can accommodate almost all commercially available 1/10 scale bodies. Despite its reasonable price, the FAZER D2 chassis kit delivers performance comparable to a pure competition drift machine, and has the potential to become a new standard machine for RWD drifting.
Includes:
- Complete chassis assembly kit
- 1.5mm/2.0mm hex wrench
- Cross wrench
- 3/4/5/5.5/7/8mm spanner
- 2 types of body mount parts
- Setting change parts
- Spare screws
Required to Complete:
- 1/10 scale body (wheelbase 260-273mm recommended)
- Drift tires
- Wheels (offset 5mm recommended)
- 2-3 channel transmitter/receiver from various manufacturers
- Drift servo
- Drift gyro
- ESC
- Motor
- Recommended battery for driving: KYOSHO SPEED HOUSE 7.2V 22HV Ni-MH battery 71322B / KYOSHO SPEED HOUSE 7.2V 36HV Ni-MH battery 71324B
- Recommended charger for driving battery: KYOSHO SPEED HOUSE C-02B AC Peak Charger 72002B *Ni-MH dedicated charger / 7.2V NiMH USB charger 72204 *Ni-MH dedicated charger
Various tools
Features:
- A RWD machine specializing in drift driving is now available as a chassis kit without R/C mechanics or body.
- You can enjoy drift driving by incorporating commercially available R/C mechanics and gyro units.
The wheelbase and tread variable mechanism allows for the mounting of commercially available 1/10 scale bodies, including those for the existing FAZER series.
Compatible with general-purpose drift tires and wheels (5mm offset recommended).
Equipped with an aluminum steering crank pin that ensures reliable steering response.
Uses a battery holder that can accommodate battery packs of different sizes, allowing most general-purpose R/C car battery packs to be installed.
Machine screws are used instead of the tapping screws of the ready set, allowing for high-precision assembly.
A total of 22 ball bearings are standard equipment for the drivetrain and steering.
Tuning up is also possible using a wide range of optional parts.
R/C mechanics, gyro unit, speed controller, motor, driving battery, and front and rear tires must be purchased separately.
