Product Description
Includes
- Gundam Exia
- 2 GN Beam Sabers
- 2 GN Beam Daggers
- Manipulators
- Fists (1 pair)
- Poseable (1 pair)
- Multipurpose weapon-holding (1 pair)
- Clawed open-palm (1 pair)
- GN Sword (GN Rifle)
- GN Shield
- GN Long Blade
- GN Short Blade
- 1/144 Setsuna F Seiei figurine
- Adapter for Action Base
Kit Features & Gimmicks
Articulation
- The head can rotate or tilt back and forth via a preassembled ball-and-double neck joint.
- Shoulder parts can...
- Be pulled upward for extra articulation.
- Swing back and forth.
- The arms can...
- Swing on a shoulder frame.
- Raise horizontally. (Depending on how you bent, the cables may hinder its articulation.)
- The upper arms can rotate.
- The elbows and knees are double-jointed.
- The wrist joints can slightly pivot.
- The manipulators...
- Can swivel on a ball-and-socket joint.
- Feature 3+1+1 articulation on the poseable hands' fingers.
- The waist can turn 360 degrees.
- The upper thighs can swing frontwards/backwards on a peg, raise horizontally on a ball-and-socket joint, and/or rotate on each piece.
- The ankles can swivel in a limited manner, or tilt sideways.
- The two-piece front feet can pivot.
Weapons/Other Gimmicks
- The hands are swappable.
- Any of the weapons can be wielded by either the poseable or fixed holding hands. (the latter is recommended for gripping stability)
- GN Drive can be optionally removed from the back.
- The clavicle antennas can be flipped up and down.
- The cockpit hatch can be opened and closed.
- GN Sword can convert into Rifle or Sword mode.
- GN Long Blade and GN Short Blade can be mounted on flip-out pegs at either hip.
- GN Beam Saber handles can be optionally removed from the shoulder armors as handheld weapons.
- GN Beam Dagger handles can be optionally removed from the rear skirt armors as handheld weapons.
- The alternate Beam Saber hilts with molded pegs can also be used for gripping stability.
- The side panels of the GN Shield convert to form "expansion mode" via minor parts rearrangement.
- Gundam Exia can mount onto the Action Base via an adapter.
Tips and Tricks
- For better results:
- The parts can be panel-lined with Gundam Markers.
- The kit can be sprayed with Mr. Hobby Top Coat.
- If using matte/flat-finish top coat, it is advisable not to spray on the clear/translucent, chromed, and the soft parts - can be done by masking or spraying top coat while the said parts are separated.
- Exercise caution while trimming the 1/144 Setsuna figurine from the runner: The molded burrs on the very thin areas (such as the arms) may snap off while trimmed with excessive strength.
