MG 0079 - GUNTANK - Brookhurst Hobbies

Includes

Guntank
- Core Fighter
- Low-Recoil Cannon x2
- 4-Tube Missile Launcher x2
1/100 figurines
- Hayato Kobayashi (1 standing, 1 sitting)
- Ryu Jose (1 standing, 1 sitting)
- Mirai Yashima (standing only)
- Bright Noa (standing only)
LED unit (green)

Core Fighter can be transformed between fighter and core block mode.
- In fighter mode, missile launcher hatches, located on the main body of the core fighter, can be opened.
- Landing gear parts (clear) are provided for displaying the core fighter separately.
Head canopy can be opened.
LED unit is provided for the light-up gimmick in the head. Two LR41 button-type batteries are required (sold separately). Head unit needs to be removed to switch the light on/off.
Panels on top of the chest can be opened to act as support pedestals to prop up the cannons.
Cockpit hatch on the torso can be opened.
Chest vents can be opened/closed.
Low recoil cannons can tilt up/down. Internal spring mechanisms allow the cannons to simulate firing/recoil.
Missile Launcher barrels can be extended/retracted (simulating firing/recoil) by rotating the middle part of the forearm.
The height of each continuous track unit can be adjusted via a dial on the respective outer side. A hatch needs to be slid down to access the dial.
Each continuous track unit can be angled outward (along the horizontal plane) and tilt slightly (along the vertical plane).
Stabilizing outrigger unit (front) and inclined ramp (back) located on the lower body can be deployed.

For better results, some/most of the details are needed to be applied and panel-lined with Gundam Markers.
Top coat (Mr. Hobby recommended) can be used to protect applied decals, if any.
- If using matte/flat-finish top coat, it is advisable not to spray on the clear/translucent parts - can be done by masking or spraying top coat while the said parts are separated.

The docking gimmick utilizes the system used for the MG RX-78-2 Gundam (Ver. 2.0).