HGWFM #19 - AERIAL REBUILD - The Witch from Mercury

Bandai - BAN

$25.00

Gundam Aerial Rebuild
- 2 Beam Sabers
- Chest Shell unit
  - Pre-printed
  - Blank
Beam Rifle
- GUND-BIT Cannon pieces
  - 1 pair of handles (two-handed mode)
  - Barrel extension
Escutcheon/11 Bit Staves
- Shield adapter

Gundam Aerial Rebuild's chest Shell unit can be built with either the tampographed or the blank piece.

The head can swivel/pivot on a ball-and-socket/hinge neck joint.
The torso can slightly tilt frontward/backwards or sideways.
The shoulder joints can swing frontward.
The arms can...
- Swivel on a ball-and-socket joint.
- Raise horizontally.
The upper arms can rotate.
Elbow joints can be bent up to 90 degrees.
The manipulators can swivel on a ball-and-socket joint.
The waist area can rotate 360 degrees.
The upper thighs can swing frontward/backward on a peg-and-socket joint, raise horizontally, and/or rotate on each piece.
The knees are double-jointed.
The ankles can pivot/tilt.
The backpack thrusters are jointed, allowing movement.

Any of the weapons can be wielded by either of the hand parts.
Beam Saber hilts can be optionally removed from the backpack as handheld weapons.
Beam Rifle can combine with the Bit Staves to form the GUND-BIT Cannon, though the lower rifle panel must be flipped out, the barrel must be replaced, and the handles attached first.
The Escutcheon can...
- Mount onto any of the forearms via an adapter, though the default position is on the left.
- Detach into individual Bit Staves for individual display.
  - The Bit Staves can also mount onto the Gundam Aerial.
The Beam Rifle can also mount onto the backpack via an adapter.
Gundam Aerial Rebuild can mount onto any Action Bases (sold separately).

For better results, some or most of the details are needed to be applied with Gundam Markers or Mr. Color paints.
Topcoat (Mr. Hobby recommended) can be used to protect applied stickers and if any, marking decals and/or painted details.
- If using matte/flat-finish top coat, it is advisable not to spray on the translucent parts - can be done by masking or spraying top coat while the said parts are separated.
The open-palm hands from the HGTWFM Mirasoul Flight Unit can be used on this Gunpla.

As with the HG Gundam Aerial kit, the Aerial Rebuild also comes with an alternate red camera eye stickers that doesn't appear in the show at the time of writing.