15 WELL PALETTE (5 PCS.) - 87125

Palettes are handy for mixing paints. Metal palettes are useful, but they require cleaning with thinner after each use. This PET plastic palette can be disposed of after each use, thus allowing the modeller to save both time and money. Each palette plate...

301 / 302 - Extender Tips / Extra Fine Extender Tips

Extender Tip- #301 For use over BSI's standard #312 top. Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application. Extra Fine Extender Tip -...

303 - Extra Long Extender Tips

For use over the standard #312 top, they provide a rigid tip with extended length to get thin and gap filling CA into hard to reach areas. They are very resistant to clogging and can be cleaned by soaking in acetone.

304 - Pocket CA Extender Tips

For use with BSI's Pocket CAs. It slips over the tip of the Pocket CA top to allow for finer application of the CA. With the tip, the CA can be applied to confined areas.

314 - Pocket Ca Top & Cap

Replacement combination of top and screw-on cap that has a built-in pin for Pocket CAs. Will fit on Pocket CA bottles only.

321 / 322 - CA Applicators Fine tip and Regular Tip

#321 - Regular Tip Non-clog 6" long pipette for the application of gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper #322 - Fine Tip Non-clog...

3M 6000 Series Half Facepiece Reusable Respirator Mask (Medium)

Made from lightweight materials, the 3M™ Half Facepiece Reusable Respirator 6000 Series offers comfort, convenience, and protection from certain airborne contaminants when paired with approved 3M cartridges and filters. The 6000 series is compatible with...

3M 6000 Series Organic Vapour Cartridge (Pack of 2)

NIOSH-approved for respiratory protection against certain gases or vapors Versatile, ergonomic, and simple to install Designed to enhance field of view and comfort on the job, these gas/vapor cartridges feature a low-profile, swept-back design. The 3M™...

4" Mini Diagonal Pliers

42 HRC Hardness Double Leaf Spring 55 Carbon Steel 1/2" Edge Length  

BANDAISPIRITS ENTRY NIPPER [RED]

BANDAISPIRITS ENTRY NIPPER

Battlefields: Frozen Tuft - BF 4225

The Frozen Tuft is perfect for decorating your frozen tundra, icy plains or other chilly environment. Combine with Battlefield Snow for perfection.   - SUPER REALISTIC BASES - 3 DIFFERENT SIZES FOR ANY BASE SIZE - EASY TO USE AND ATTACH QUICKLY WITH...

Battlefields: Highland Tuft - BF 4222

Rolling hills and deep lochs, the Highland Tuft lets you mimic this mysterious scenery.   - SUPER REALISTIC BASES - 3 DIFFERENT SIZES FOR - ANY BASE SIZE - EASY TO USE AND ATTACH QUICKLY WITH SUPER GLUE

Battlefields: Jungle Tuft - BF 4228

Bright green and full of imaginary mosquitoes, this tuft closely mimics the jungle or spring grass early in the season.   - SUPER REALISTIC BASES - 3 DIFFERENT SIZES FOR ANY BASE SIZE - EASY TO USE AND ATTACH QUICKLY WITH SUPER GLUE

Battlefields: Swamp Tuft - BF 4221

It came from the swamp! A very realistic look and very good to combine this tuft with others for great effects.   - SUPER REALISTIC BASES - 3 DIFFERENT SIZES FOR ANY BASE SIZE - EASY TO USE AND ATTACH QUICKLY WITH SUPER GLUE (P-CODE: GL 2014) - USE OUR...

Battlefields: Winter Tuft - BF 4223

Winter is coming, and with the Winter Tuft so are your troops. Combine with Battlefield Snow for the perfect arctic base.   - SUPER REALISTIC BASES - 3 DIFFERENT SIZES FOR ANY BASE SIZE - EASY TO USE AND ATTACH QUICKLY WITH SUPER GLUE

Combo Pack Maxi Cure & Insta-Set - 157H

Bob Smith Industries has created a unique combo pack that contains a 1 oz. bottle of its extra thick Maxi-Cure CA in a Pocket CA bottle with a 2 oz. spray bottle of its Insta-Set Accelerator and two #304 extender tips. This combo pack is great for those...

Desktop Vacuum Cleaner

Detail Sable Brush Pack

DIORAMA TEXTURE PAINT SNOW EFFECT (WHITE)

  This water-based paint features a paste-like texture with white fine marble particles (0.01-0.20mm) which realistically recreate powder snow surfaces. When used in conjunction with the Snow Effect paint, a wide variation of snow surfaces can be richly...

Double Sided cutting Mat - 230 x 190mm / 9"x7.5"

Self healing Double Sideded cutting mat Keep mat out of direct sunlight and heat store mat flat  DO NOT ROLL Cut in differnt positions to extend lif of the mat  

DSPIAE Water Guiding Paper

Wet Pallet Paper replacement.

Dust Collector

Dust Collector Replace Filter

Dust Filter Only

Entry Nipper Blue

BANDAISPIRITS ENTRY NIPPER

Entry Nipper White

BANDAISPIRITS ENTRY NIPPER

Epoxy Putty

Hobby Mio Epoxy PuttyWeight: 100gColor: Grey (Color after mixing of AB parts)Yellow (Color after mixing of AB parts)  [Product Description]Soft clay was used for both parts of clay A B.It is easy to mix and operate, and the surface is fine without air...

EXTRA-THIN CEMENT 40Ml (Quick-Setting) - Tamiya 87182

Tamiya Extra Thin Cement is a widely popular glue among modelers around the world. You will find it in most modeler’s workshops. This version is the “quick setting” variant that dries around 4 times faster than the original Tamiya Extra Thin Cement,...

FA01 Mini Cleaning Brush Set

Excellent tool to help keep your airbrush clean and performing at it's best. Features:- A set of 5 varying sized brushes.- All stainless steel handle with nylon bristles.- An essential part of your airbrush cleaning kit.    

Finishing Abrasives P1000 - 3 Sheets

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.

Finishing Abrasives P600 - 3 Sheets

Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.

Foam-Cure™ 1 Fl. oz (30 ml) - BSI141

FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To...

Foam-Cure™ 4fl. oz. (120 ml) (Clamshell) - BSI142

FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To...

GAIA FINISH MASTER EXTRA-FINE R

Includes: 1 Plastic Handle, 10 Foam Tips This item is highly recommended for SD Owners, but anyone with a need for a fine tipped, long-lasting cleaning and application tool may find it useful! The wedge shaped tips of this tool are perfect for cleaning...

Godhand 125 Flat Plastic Cutting Nipper

Youre standard Nipper but by GodHand

Grip-It Grip Glue 1oz. - Clamshell - BSI222H

Grip-it™ has been specifically formulated for applying grips and mats for recreational vehicles. Grip-It™ works great on all makes of grips for motorcycles, jet skis, snowmobiles and bicycles. Grip-It™ has a 10-25 second working time and the grip is...

GT50 Mr. Pin Vise Basic Set 1/1.5/2/2.5/3mm, GSI

Gunprimer Recover

GW63-12 CITADEL SMALL BASE BRUSH

This small brush (S Base), ideal for basecoating features a blend of synthetic and sable bristles, and holds a fine point allowing you to reach those tricky areas and achieve a great result.

GW63-13 CITADEL MEDIUM BASE BRUSH

This medium brush (M Base), ideal for basecoating features a flat shape with a curved top, entirely synthetic bristles for extended durability and two differing styles - side on for coverage, and a flat edge for detail.

GW63-14 CITADEL LARGE BASE BRUSH

Composed of entirely synthetic bristles for durability (this brush will see a lot of use!) and ideal for basecoating, this brush (L Base) features a large, wide side and a fine pointed edge - ideal for both fast coverage and tricky to reach areas.