HGUC #219 - DIJEH - Z Gundam

Bandai - BAN

$24.00

Two different options are provided for the mono-eye construction: one with the plain rail and one with dual-eye molded. These can be interchanged but will require some disassembly of the head unit.

The head can rotate, tilt, and move forwards/backwards on a double-sided ball-joint neck.
The upper torso can bend forward and rotate slightly.
Each shoulder joint can swing upwards, allowing the arms to be raised beyond parallel to the ground.
Each shoulder joint construction can slide out to enable them to swing forwards/backwards.
The shoulder-mounted shield on the right shoulder moves independently on a ball joint.
The arms can...
- Swivel on a ball-and-socket joint.
- Raise horizontally.
The upper elbows can rotate.
Elbows and knees are double-jointed and can be bent up to about 180 degrees.
The manipulators can swivel on a ball-and-socket joint.
The waist can rotate, though hindered by the red cockpit hatch unless it's lifted up.
Front and side skirt armors can lift up to avoid interference with the leg articulation.
The hip joint axis is a see-saw joint, allowing it to move up/down on one side.
The upper thighs can swing frontwards (and backwards in a limited extent) on a peg, raise horizontally, and/or rotate on each piece.
The ankles can tilt in an extent, or slightly pivot.

The hands are swappable.
Each of the weapons must be wielded by their respective hands.
- While using the Beam Rifle, the model can be posed supporting the rifle with the left hand using the open-palm manipulator.
The Clay Bazooka can be stored on either side of the backpack, or onto the left shoulder via a connector piece.
The Beam Naginata can be optionally removed from the rear waist armor (via connector) as a handheld weapon.
The Dijeh can be mounted on an Action Base (sold separately).

For better results, some or most of the details are needed to be applied/panel lined with Gundam Markers and/or Mr. Color paints.
Top coat (Mr. Hobby recommended) can be used to protect applied stickers and if any: marking decals and painted details.