Accessories / Parts

JR 13MM ROLLER BALL BEARING - TAM15475

Make sure that your rollers are running at top efficiency by fitting them with these ball bearings. Made from steel, they will provide smooth progress along the track, in conjunction to superior reliability. Set Contents13mm Ball Bearings x22x8mm Screws...

JR 17MM ALUM BALL RACE ROLLERS TAPERED/RINGLESS - TAM95597

This product takes the popular, high performance aluminum ball-race rollers from Item 15522 and gives them a tapered underside that will help your Mini 4WD car make it through to the end of the race! • 17mm rollers are crafted in durable, precision...

JR 17MM ALUM ROLLERS - TAM15449

These rollers feature a low-friction plastic outer ring to help maintain mini 4WD machine"s speed during cornering. Ball bearings ensure smooth rotation and feature a 3-spoke design.

JR 19MM ALUM BALL-RACE ROLLER J-CUP 2023 - TAM95160

This 19mm Aluminum Ball-Race Roller Set celebrates Japan Cup 2023. The rollers are lightweight, rigid and have built-in ball bearings for smooth rotation.• 2x8mm screws x2• Spacers x4• 520 Bearing-built-in rollers x2• Rubber rings x2• Compatible with...

JR 3-SPOKE BALL-RACE ROLLERS 17MM/ALUMINUM - TAM15161

Lightweight 17mm aluminum roller with three spokes. Rubber rings are included for shock absorption.

JR 40TH ANNIV. HG CARBON STAY WIDE RR SLIDING DAMPER 2MM - TAM95642

This is a limited-edition product to celebrate the Mini 4WD 40th Anniversary. Use this 2mm thick carbon fiber stay featuring orange Mini 4WD 40th Anniversary logo in place of 2mm thick aluminum stay included in Item 15467 Wide Rear Sliding Damper.• HG...

JR ALUMINUM BALL-RACE ROLLERS 19MM 6 SPOKE - TAM95513

This set of ball bearing-equipped rollers enable fast performance for your Mini 4WD racer! This specific set features plastic rings molded in red for an added splash of color. Rollers with ball bearings give superior smoothness for more efficient speed...

Jr Basic Mini 4Wd Car Box - TAM95670

Celebrate the 30th Anniversary of Fully Cowled Mini 4WD with this limited-edition basic Mini 4WD Car Box & Sleeve. The handy box lets you both store your Mini 4WD machine safely and check against official Mini 4WD dimension regulations. • Assembled...

JR BASIC TUNE-UP PARTS - 15514

This handy option set works in conjunction with the FM-A chassis kit, the Rowdy Bull (Item 18707) and other kits based on the FM-A chassis. Tuning up your Mini 4WD car can be a daunting prospect if you don't know where to start. Therefore, this his set...

JR BRAKE SET AR CHASSIS FLUOR. YELLOW - TAM95535

This Brake Set, designed for the AR Chassis, includes a brake plate, adapters, two kinds of brake sponges, and 3 types of spacers. By using the adapters and spacers, brake parts attachment positions can be easily changed, allowing fine setting adjustment...

JR BRAKE SET ORANGE AR CHASSIS - TAM95558

This color variation of Item 15458 Brake Set (for AR Chassis) includes brake plate, adapters, two kinds of brake sponge, and three types of spacers, with plastic parts molded in orange. Brake part attachment positions can be changed to adapt the car to...

JR CARBON STAY WIDE REAR SLIDING DAMPER 2MM - TAM95285

These lightweight and rigid 2mm-thick solid carbon fiber stays are for use with Wide Rear Sliding Dampers, replacing the aluminum roller stay parts. The roller stay is a key part of wide sliding dampers, as it slides when the Mini 4WD car hits a track...

JR DOUBLE ALUMINUM ROLLERS - TAM15403

This new 9-8mm Mini 4WD set offers you roller setting variation to allow you to better prepare your Mini 4WD for the racetrack.

JR FRONT UNDER GUARD ORANGE - TAM95559

This is a orange version of the Mini 4WD front under guard, which serves as a brake and helps your car stay on track after jump landings. Its three-piece configuration enables both normal and wide roller settings. Two sets of under guards with different...

JR FRONT UNDERGUARD FLUORESCENT YELLOW - TAM95537

This is a fluorescent yellow version of the Mini 4WD front under guard, which serves as a brake and helps your car stay on track after jump landings. Its 3-piece configuration enables both normal and wide roller settings. Two sets of under guards with...

JR FRP MULTI ROLL SETTING STAY - TAM15394

You can now install either 9mm, 13mm, or 19mm roller bearings with this new FRP Multi-Roller Setting Stay. Can be installed to either the front or rear of your Mini 4WD machine. This new FRP plate offers a wider range of settings than aluminum plates...

JR FRP REINFORCING PLATE SET SHORT - TAM15431

By installing these plates at the sections between the center and front/rear units of a MS chassis, the overall chassis rigidity will further improve and help maintain roller attachment angles.These plates can also be attached to side stays of Super X...

JR FRP REINFORCING PLATES 13/19MM ROLLERS - TAM15530

This FRP reinforcing plate is made of a more flexible material compared to its carbon plate counterpart in Item 15497. The FRP reinforcing plates can be used with 13mm or 19mm rollers inside Mini 4WD regulations. • FRP Reinforcing Plates (thickness:...

JR FRP WIDE FRONT PLATE VZ CHASSIS - TAM15524

This is a dedicated FRP wide front plate developed specially for the new VZ chassis. This rigid FRP component can be installed with the front bumper removed from the VZ, without sacrificing durability. • FRP Wide Front Plate x 1• Features holes to enable...

JR FRP WIDE FRONT PLATE FOR AR CHASSIS - TAM15451

This FRP plate is specially designed for the new Mini 4WD AR chassis and features holes to enable the installation of 9mm, 11mm, 13mm, and 19mm rollers within the standard Mini 4WD race regulations.

JR HG 19MM BALL RACE ROLLERS - TAM95643

JR HG 19MM BALL RACE ROLLERSDESCRIPTIONThis is a limited-edition version of the popular racing rollers from Item 15464 to commemorate the Mini 4WD 40th Anniversary. These lightweight yet tough rollers have built-in 520 ball bearings for smooth...

JR HG ALUM BALL RACE ROLLERS 17MM RINGLESS - TAM15522

These are 17mm Aluminum ringless rollers. They are highly durable and offer silky smooth rotation. • 17mm Aluminum Rollers x2• Small parts for attachment included.• Built-in 520 ball bearings provide smooth roll.• Compatible with Mini 4WD and Mini 4WD...

JR HG ALUM BALL-RACE ROLLERS 13MM TAPERED (RINGLESS) - TAM95497

These are TAMIYA tapered ball race rollers for MINI4WD race cars. Tapering them encourages the car to stay on the course when it mounts the walls, with the aim of raising your race completion rate!• 13mm Tapered Aluminum Ball-Race Rollers (Ringless) x2•...

JR HG ALUM BALL-RACE ROLLERS 19MM RINGLESS/ RED ASIA CHALLENGE - TAM95657

This limited-edition product is based on our popular Item HG 19mm Aluminum Ball- Race Rollers (Ringless) (item 15464) to commemorate Tamiya Mini 4WD Asia Challenge 2024 (TMAC).• 2x8mm screws x2• Spacers x4• Aluminum rollers with built-in 520 ball...

JR HG ALUM BALL-RACE ROLLERS 19MM TAPERED/RINGLESS GOLD - TAM95583

This is a limited-edition gold color variation of the 19mm tapered ball-race rollers. Tapering the rollers encourages the car to stay on the course when it mounts the walls, with the aim of raising your race completion rate! • Tapered Aluminum Ball-Race...

JR HG ALUM BALL-RACE ROLLERS 19MM TAPERED/RINGLESS/GREEN - TAM95609

This is a limited-edition color variation of Item 95436 HG Alum Ball-Race Rollers 19mm Tapered/ Ringless. Tapering the rollers encourages the car to stay on the course when it mounts the walls, with the aim of raising your race completion rate!• Tapered...

JR HG ALUM BALL-RACE ROLLERS LW 19MM TAPERED/RINGLESS - TAM95651

These are HG (High-Grade) 19mm Tapered Aluminum Ball-Race Rollers (Ringless) with an innovative design featuring holes to restrict extra weight. This set includes two tapered rollers which help your car to quickly track back on the course if it happens...

JR HG CARBON REINFORCING PLATE 1.5MM TMAC 2020 - TAM95544

This special version of Item 15495 commemorates Asia Challenge 2020. These ingenious carbon fiber plates reinforce those parts of a Mini 4WD machine which come under strain during a race, such as bumper and roller stays. • HG Carbon Reinforcing Plates (1...

JR HG CARBON WIDE FRONT PLATE AR CHASSIS 1.5MM ASIA CHALLENGE - TAM95652

This special edition item commemorates Tamiya Mini 4WD Asia Challenge 2024 (TMAC). The 1.5mm carbon wide front plate is the same shape as seen in Item 15451 FRP Wide Front Plate (for AR Chassis) (also as seen in Item 95042 carbon plate).• HG Carbon Wide...

JR HG CARBON WIDE REAR PLATE AR CHASSIS 1.5MM ASIA CHALLENGE - TAM95653

This special edition item commemorates Tamiya Mini 4WD Asia Challenge 2024 (TMAC). The 1.5mm carbon wide rear plate is the same shape as seen in Item 15452 FRP Wide Rear Plate (for AR Chassis) (also as seen in Items 95043 and 95478 carbon plates).• HG...

JR HG FRONT STAY 1.5MM CARBON J-CUP 2023 - TAM95157

Tamiya welcomes a variation of this carbon fiber front stay (Item 95433) which celebrates Japan Cup 2023. This stay can be fitted to your Fully Cowled Mini 4WD series car without the need for any modifications. Even beginners can use this upgrade part...

Jr Hg Multi Roll Setting Stay - TAM95166

This limited-edition carbon fiber multi roller setting stay (1.5mm) commemorates Japan Cup 2024. The item is the same shape as Item 95144; however, this item includes the Japan Cup and Tamiya logos in pink print. • 1.5mm-thick Carbon Multi Roller Setting...

Jr Hg Multi Roll Setting Stay - TAM95167

This limited-edition carbon fiber rear multi roller setting stay (1.5mm) commemorates Japan Cup 2024. The item is the same shape as Item 95145; however, this item includes the Japan Cup and Tamiya logos in pink print. • 1.5mm-thick Carbon Rear Multi...

JR HG MULTI ROLL SETTING STAY 1.5MM CARBON J-CUP 2020 - TAM95131

This limited-edition carbon fiber stay commemorates Japan Cup 2020! Use it to boost performance and give your car a new look! It has updated print from the standard carbon stay as seen in Item 95121.• 1.5mm-thick Carbon Fiber Stay x1• Rigid carbon fiber...

JR HG MULTI ROLL SETTING STAY 1.5MM CARBON J-CUP 2020 GOLD - TAM95135

This is a limited-edition carbon fiber stay to commemorate Japan Cup 2020! Use it to boost performance and give your car a new look! This features the same design as Item 95131, but with the print in gold.• 1.5mm-thick Carbon Fiber Stay x1• Rigid carbon...

JR HG MULTI ROLL SETTING STAY REAR 1.5MM CARBON J-CUP 2020 - TAM95132

Japan Cup is back again in 2020, and this limited-edition carbon fiber stay commemorates this year’s series! Use it to boost performance and give your car a new look! It has updated print from last year’s version.• 1.5mm-thick Carbon Fiber Stay x1• Shape...

JR HG MULTI ROLL SETTING STAY REAR 1.5MM CARBON J-CUP 2021 - TAM95145

This limited-edition carbon fiber stay celebrates Japan Cup 2021! This item is the same shape as Item 95122. It incorporates the Japan Cup and Tamiya logos in blue print, making it a very special and unique release. About the Stay:You can install either...

JR HG MULTI ROLL SETTING STAY REAR 1.5MM CARBON J-CUP 2022 - TAM95154

This limited-edition carbon fiber rear multi roller setting stay commemorates Japan Cup 2022. This item features the same shape as Item 95122, with the Japan Cup/Tamiya logos and stripes in blue green print. Make use of this item to enhance performance...

JR HG MULTI ROLL SETTING STAY RR 1.5MM CARBON J-CUP '20 GOLD - TAM95136

This is a limited-edition carbon fiber stay to commemorate Japan Cup 2020! Use it to boost performance and give your car a new look! This features the same design as Item 95132, but with the print in gold.• 1.5mm-thick Carbon Fiber Stay x1• New shape...

JR HIGH SPEED COUNTER GEAR SET - TAM15236