Cement / Glues

Insta-Cure+™ Super Glue, CA: 1/2 oz. - BSI106

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas,...

Insta-Cure+™ Super Glue, CA: Clamshell 1 oz - BSI133H

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas,...

Insta-Flex™ Flexible CA - 1oz. - BSI119

Super Thin Low Odor glue 2-5 second flexible glue. Insta-Flex™ flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX™ does not turn brittle and remains clear, even if accelerated with INSTA-SET™...

Insta-Set™ CA Accelerator 2 fl.oz Pump Spray - BSI151

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when...

Insta-Set™ CA Accelerator 6.75 fl.oz Aerosol Spray (200 ml) - BSI155

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when...

Insta-Set™ CA Accelerator 8 fl.oz Refill Bottle CA Accelerator - BSI152

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when...

Insta-Set™ CA Accelerator Clamshell 2 fl.oz (59 ml) - BSI151H

 INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when...

Liquid Cement with Precision Applicator 1oz. - 281216

Fast-Drying Liquid Cement with Precision Applicator; Use for polystyrene and ABS plastic; Bonds plastic by dissolving and cementing; Precision applicator makes easy work of gluing even small intricate detailed parts.

Maxi-Cure™ Super Glue, CA: 1/2oz. - BSI111

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a...

Maxi-Cure™ Super Glue, CA: 1oz. - BSI112

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a...

Maxi-Cure™ Super Glue, CA: Clamshell 1oz. - BSI135H

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a...

MI-01 - Micro Set

Setting Solution for decals.Softens decals and improves adhesion. Also Decal remover. Micro Set is a very versatile decal setting solution that does several things to MicroscaleDecals to improve application. Micro Set should be applied to the surface of...

Mid-Cure 15 min Epoxy 13oz. - BSI212

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass...

Mid-Cure 15 min Epoxy 4.5oz. - BSI203

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass...

Mid-Cure 15 min Epoxy 9oz. - BSI204

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass...

Mr. Cement SP Black

Plastic Cement Orange - 87012

This cement is for use in assembling plastic (styrene) models. It comes is a stable hexagonal bottle 47mm tall.Contents: 20ml.Features a brush for application on the reverse side of the cap.Working time between 1-2 minutes. Fully cures in 24 hours.

PLASTIC CEMENT, 5/8 OZ TUBE

5/8 oz. Cement for Plastics; Use for polystyrene and ABS plastic.  

PLASTIC MODEL CEMENT 5/8OZ

Plastic-Cure Brush on Gap Filling CA: 1/2oz. - BSI105

Brush on Gap Filling CA glue

Plastruct Bondene Plastic Solvent Cement Glue 2oz. bottle

BONDENE SOLVENT CEMENT A specially formulated solvent cement for fast, permanent bonding of most similar plastics, including Styrene. Quickly bonds ABS to ABS, Styrene to Styrene, Butyrate to Butyrate and Acrylic to Acrylic. Actually melts the surfaces...

Plastruct Plastic Weld Cement 2oz. bottle3.25

PLASTIC WELD SOLVENT CEMENT The leading general purpose solvent cement for fast, permanent bonding of most dissimilar plastics. Immediately tacky. Sets in minutes. Permanently bonds ABS to Butyrate, ABS to Styrene, ABS to Acrylic and more. Actually...

Quik-Cure™ Epoxy 5 Minute Epoxy 4.5 oz. (128g) (Clamshell) - BSI201

QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in...

Slow-Cure™ Epoxy

SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as...

Super Fix Filler 1oz. - BSI158

Filler for super fix adhesive he Bob Smith Industries Super-Fix Filler Welding Powder is part of a two-part adhesive system developed to fill gaps and voids. It is sandable and paintable and cures in 1-3 seconds. Super-Fix is great for repairs at home,...

Super-Fix™ System 1 oz. - BSI158H

Super-Fix™ is two-part adhesive system developed to fill gaps and voids. It is sandable and paintable and cures in 1 - 3 seconds. Super-Fix™ is great for repairs at home, on autos, boats, and motorhomes. The super-thin consistency is perfect for bonding...

Super-Gold+™ Odorless Foam-Safe CA 3/4oz. - BSI139

Gap filling, foam-safe superglue. 1/2 oz.SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no...

Super-Gold+™ Odorless Foam-Safe CA Clamshell 3/4oz. - BSI139H

SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no fumes that irritate the nose and eyes...

Super-Gold™ Odorless Foam-Safe CA 1/2oz - BSI121

Foam-safe cyanoacrylate super glue. 3-5 Sec insta cure odorless thin glue 3-5 Sec SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to...

Ultra-Cure™ Tire Glue - BSI130

Ultra-Cure™ is a very high performance clear cyanoacrylate that has a viscosity (thickness) in-between that of Insta-Cure Super Thin and Insta-Cure+ Gap Filling Medium. It is ideal for the mounting of rubber tires onto R/C car wheels. It is available in...

Un-Cure™ CA Debonder: 1oz - BSI161

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off...

Un-Cure™ CA Debonder: 8oz Refill Bottle - BSI162

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off...

Un-Cure™ CA Debonder: Clamshell 1oz - BSI161H

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off...

ZAP-A-GAP Medium CA+ 1oz.

ZAP-A-GAP CA+ will bond metal and or plastic materials allows for fast simple positioning of parts for assembly or machining.  Wood, plastic, metal, glass, ceramic, fabric, rubber, fiberglass, carbon fiber, or any combination of, ZAP-A-GAP CA+ can help...